Great startup btw 😂👍
You think its same on v10? And thank you btw
Received some of my fittings and a catch can i will modify to be oil collector pre pump
Are you going to run the oilfeed thrue these? I recomend that you use pressed hoses to the feed! I have a friend that had a hosefail and a fire started.
Hahah i guess not anymore i will order feed line problem is im not sure how long i need as i still havent figured out where to get the feed from here is photo from my oil filter housing
Also are you running anything on the feed to prevent from oil going into turbos when the car is off ? Like a valve ? Maybe also a valve on the return
Last edited by lex99frc; 08-17-2019 at 02:28 PM.
Some updates from today finished turbo flanges to the stock downpipes and started working on the x pipe which is 3.5 inch
Also took the front bumper off to measure the size for heat exchanger still confused where to run the water lines
Looks great 👍👍
What ive read they use to take the oilfeed from the side of the engine via a banjo!
it will be very difficult for me to move them apart as i would have trouble running cold side piping to intercoolers and would likely need custom intercoolers
also i do not think the 2 90 degree bends pre turbo will make much of a problem
i think i will take oil feed from the oil pressure sensor