Audi R8 Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Up for sale is a set of nearly new staggered rims and tires that came off my 2012 Audi R8. It's a gorgeous set - less than 2000 miles on them. I paid over $4,000 for them. I recently sold my car with the original wheels and tires and need someone else to enjoy these on their R8.

$2,500 - for wheels, lugs, tires, and TPMS.

The tires are superb. They are Michelin Pilot 4S performance tires. 245/30 ZR 20s on the front rims, and super-wide 325/25 ZR 20s on the back rims. Barely worn.

The wheels are straight and super clean. They are gunmetal gray Forgestar F14 style wheels with carbon fiber center caps.

BOLT PATTERN: 5 x 112
FRONT WHEELS: 20 x 9, 37 offset
BACK WHEELS: 20 x 12, 49 offset

One wheel has slight curb rash on the very edge (see picture attached). Other than that -- and the fact that I ceramic coated the wheels when it was too cold in my garage and the ceramic coating has very slight hairline cracks that you can see when looking really close -- the wheels are perfect.

This set of wheels and tires fit any Gen1 R8 perfectly. I had them custom built with offsets to get the wheels and tires flush with the outside wheel wells on the car. And so that I could get wider tires (325s) on the back without doing any mods or spacers. I've attached a picture of them on my car when I had it.

I also have a Maxton Design front splitter with mounting hardware. It was test mounted on my car but never completely installed. I sold the R8 before I got the final install done. $275

At this point in time, I'm only interested in local pickup. Located in Omaha, NE.

Thanks for looking!

258721
135698664_10224989612710877_2506563114273171303_o.jpg


258722


258723


258724


258725


258726


258727


258728


258729


258730
 

·
Registered
Joined
·
14 Posts
Discussion Starter #4
Iinterested in the maxton if you end up shipping
I may be open to it after I see if I can't sell it to someone more local. I'd be willing to travel an hour or two to meet someone if they wanted. Part of the problem for the splitter is that I don't have the original boxes, but I could bubblewrap the heck out of it. Also, due to it's odd size, the shipping for me when I bought it was $200 alone. I'm not sure if it's worth it for that much extra cost.
 

·
Registered
Joined
·
14 Posts
Discussion Starter #5
Bump. Great set of 20” wheels and tires...designed specifically for a perfect fit on a Gen 1 R8.
 

·
Registered
Joined
·
24 Posts
Hey,

I'd be interested in the wheels and tires! I'm in Raleigh, NC. Let me know if you end up reconsidering the local pick up. I've used Uship before for shipping which has worked well on my end. Don't know if you'd ever consider that.

Thanks for considering!

Sam
 
1 - 6 of 6 Posts
Top