Audi R8 Forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
52 Posts
Discussion Starter #1
Hi folks,

We are close to purchasing a 2014 v10+. It has the standard black leather. I would like to replace with the diamond stitching design. I would be replacing the seat covers, doors and the headliner.

Yes I know it is expensive...

Has anyone done this before? I saw posts asking how to do this but not sure if anyone has pulled this off yet.


The part numbers below were the ones I saw in a post from RNLabas.

Door card leathers L/R : 423 867 103M GMI - USD3750; 423 867 108M GMI - USD3290

Seat bottom leather L/R : 427 881 405A NOH - USD970; 427 881 406 C NOH = USD970

Seat back leather L/R : 8J8 881 805 AT NOH - USD1030; 8J8 881 806 AT NOH - USD1030
 

·
Registered
Joined
·
158 Posts
There was a thread of someone who was tailoring a special diamond stitch set of leathers - can't seem to find it. Also, sounds like a neat idea but won't you will still be missing the diamond stitched headliner to complete the makeover?
 

·
Registered
Joined
·
429 Posts
You might need to replace the center console, instrument cluster cover & radio trim surround if you want to match the white stitching on the doors cards & seats.

DSC_0383e.jpg

DSC_0387e.jpg

Screen Shot 2019-09-05 at 9.44.18 pm.jpg

r8-v10-interior.jpg

I had attempted this previously but ended up changing my idea and sold the seats.
 

·
Premium Member
Joined
·
881 Posts
2014 did NOT have the headliner, so while it's very nice (and at about $10K not so cheap) it would look obvious to most that it was post-fit. And you have to replace the windshield to change it... the rest will cost a pretty penny when said and done and like noted above, prolly not really worth it in added or residual value.
 

·
Registered
Joined
·
52 Posts
Discussion Starter #7
I called my local Audi dealer and they said the diamond stitched header would be this part number: 0420-867-505-G-25M
It cost $1,100.
Can you confirm your part number for the headliner? Want to make sure we don’t order the wrong one.

Thanks
 

·
Registered
Joined
·
52 Posts
Discussion Starter #8
R8 Stuff- can you supply the white stitched black leather trim pieces called out in this thread as well?
 

·
Premium Member
Joined
·
1,279 Posts
I called my local Audi dealer and they said the diamond stitched header would be this part number: 0420-867-505-G-25M
It cost $1,100.
Can you confirm your part number for the headliner? Want to make sure we don’t order the wrong one.

Thanks
Seems like the correct part number comparing this to a VIN with this same spec
 

·
Registered
Joined
·
77 Posts
I had the same inclination plus lots of carbon. Once I got the Audi original prices I was slightly in shock! So I had my local trimmer do my seats centre console and door arm rests. Whilst he had it all out he sent the trim for carbon dipping and honestly it looks just like carbon. Total price in UK was £2000 for the Nappa leather Inc fitting and £600 for the dipping. I think 1 bit of the trim in real carbon around the gear lever is the same price!
IMG_2019-01-14_16-11-14.JPG
20200207_125048.jpg
Screenshot_20190218-111443_Facebook.jpg
20190524_161818_1.jpg
 
1 - 13 of 13 Posts
Top