Audi R8 Forums banner

1 - 20 of 78 Posts

·
Premium Member
Joined
·
92 Posts
Discussion Starter #1 (Edited)
Mode Carbon R8 Front Lip​

The nose of the R8 platform is a serious affair, with its aggressive slant nose demeanor and sharp bodywork setting it apart from anything else on the road. We are proud to offer something also unlike anything else on the road with our Front Lip: the first full carbon fiber Splitter designed for the R8 platform with your daily life in mind.

Our Splitter is designed for function and style down to the smallest details. The purposeful lines of the Front Splitter compliment the already aggressive front bumper lines without being overly ostentatious, allowing the fascia to retain its bold overt character while channeling airflow to aid in aerodynamics.*

The emphasis of this design concept is one of perhaps the ultimate functionality: practicality in your daily driving experience. Since the nose of the R8 platform is naturally low (especially on aftermarket suspension setups), we were careful to optimize ground clearance for ultimate street drive-ability. Extra attention was paid to the sides of the Splitter; this lack of protrusion will ultimately allow you to angle the car over slanted driveways, speed bumps, and any other common occurrences in your day-to-day life with the car.

*We will hold off on claiming functional down-force until a wind tunnel test is conducted. However, the angles and openings of the Splitter are designed with the intention of achieving aerodynamic gains.


Key features:

Fitment for all R8 models
100% pure carbon fiber
Vacuum infusion, dry lay process
Superior stiffness-to-weight ratio
Pin straight weave
UV protected high-gloss clear coat
Comes with 3M tape pre-attached


R8 Mode Front Lip-4.jpg

R8 Mode Front Lip-3.jpg

R8 Mode Front Lip-7.jpg

R8 Mode Front Lip-1.jpg

R8 Mode Front Lip-6.jpg
 

·
Registered
Joined
·
110 Posts
Mode Carbon R8 Front Lip​

The nose of the R8 platform is a serious affair, with its aggressive slant nose demeanor and sharp bodywork setting it apart from anything else on the road. We are proud to offer something also unlike anything else on the road with our Front Lip: the first full carbon fiber Splitter designed for the R8 platform with your daily life in mind.

Our Splitter is designed for function and style down to the smallest details. The purposeful lines of the Front Splitter compliment the already aggressive front bumper lines without being overly ostentatious, allowing the fascia to retain its bold overt character while channeling airflow to aid in aerodynamics.*

The emphasis of this design concept is one of perhaps the ultimate functionality: practicality in your daily driving experience. Since the nose of the R8 platform is naturally low (especially on aftermarket suspension setups), we were careful to optimize ground clearance for ultimate street drive-ability. Extra attention was paid to the sides of the Splitter; this lack of protrusion will ultimately allow you to angle the car over slanted driveways, speed bumps, and any other common occurrences in your day-to-day life with the car.

*We will hold off on claiming functional down-force until a wind tunnel test is conducted. However, the angles and openings of the Splitter are designed with the intention of achieving aerodynamic gains.


Key features:

Fitment for all R8 models
100% pure carbon fiber
Vacuum infusion, dry lay process
Superior stiffness-to-weight ratio
Pin straight weave
UV protected high-gloss clear coat
Comes with 3M tape pre-attached


View attachment 91193

View attachment 91201

View attachment 91209

View attachment 91217

View attachment 91225
Pm me for pricing please - Thanks...
 

·
Premium Member
Joined
·
321 Posts
Pm me a price please. Maybe a group buy if there is enough interest?

Mode Carbon R8 Front Lip​

The nose of the R8 platform is a serious affair, with its aggressive slant nose demeanor and sharp bodywork setting it apart from anything else on the road. We are proud to offer something also unlike anything else on the road with our Front Lip: the first full carbon fiber Splitter designed for the R8 platform with your daily life in mind.

Our Splitter is designed for function and style down to the smallest details. The purposeful lines of the Front Splitter compliment the already aggressive front bumper lines without being overly ostentatious, allowing the fascia to retain its bold overt character while channeling airflow to aid in aerodynamics.*

The emphasis of this design concept is one of perhaps the ultimate functionality: practicality in your daily driving experience. Since the nose of the R8 platform is naturally low (especially on aftermarket suspension setups), we were careful to optimize ground clearance for ultimate street drive-ability. Extra attention was paid to the sides of the Splitter; this lack of protrusion will ultimately allow you to angle the car over slanted driveways, speed bumps, and any other common occurrences in your day-to-day life with the car.

*We will hold off on claiming functional down-force until a wind tunnel test is conducted. However, the angles and openings of the Splitter are designed with the intention of achieving aerodynamic gains.


Key features:

Fitment for all R8 models
100% pure carbon fiber
Vacuum infusion, dry lay process
Superior stiffness-to-weight ratio
Pin straight weave
UV protected high-gloss clear coat
Comes with 3M tape pre-attached


View attachment 91193

View attachment 91201

View attachment 91209

View attachment 91217

View attachment 91225
 
1 - 20 of 78 Posts
Top